Cisco TelePresence SX20 Codec
Contents
Introduction
xStatus Network CDP PortID
Returns the identification the switch uses of the port the endpoint is connected to.
Value space of the result returned:
<String>
Example:
xStatus Network CDP PortID
*s Network 1 CDP PortID: "GigabitEthernet1/0/23"
** end
xStatus Network CDP Duplex
Indicates the status (duplex configuration) of the CDP broadcast interface. Used by network
operators to diagnose connectivity problems between adjacent network elements.
Value space of the result returned:
<String>
Example:
xStatus Network CDP Duplex
*s Network 1 CDP Duplex: "Full"
** end
xStatus Network CDP VTPMgmtDomain
Returns the switch's configured VTP management domain name-string.
Value space of the result returned:
<String>
Example:
xStatus Network CDP VTPMgmtDomain
*s Network 1 CDP VTPMgmtDomain: "anyplace"
** end
xStatus Network CDP Address
Returns the first network address of both receiving and sending devices.
Value space of the result returned:
<String>
Example:
xStatus Network CDP Address
*s Network 1 CDP Address: "192.0.1.20"
** end
SX20 Codec API Reference Guide TC7.0, JANUARY 2014.
D14949.08
About the API
xConfiguration
xStatus Network CDP PrimaryMgmtAddress
xStatus Network CDP SysName
xStatus Network CDP SysObjectID
161
xCommand
Returns the management address used to configure and monitor the switch the endpoint is
connected to.
Value space of the result returned:
<String>
Example:
xStatus Network CDP PrimaryMgmtAddress
*s Network 1 CDP PrimaryMgmtAddress: "10.1.1.2"
** end
Returns the SysName as configured in the switch the endpoint is connected to.
Value space of the result returned:
<String>
Example:
xStatus Network CDP SysName
*s Network 1 CDP SysName: ""
** end
Returns the SysObjectID as configured in the switch the endpoint is connected to.
Value space of the result returned:
<String>
Example:
xStatus Network CDP SysObjectID
*s Network 1 CDP SysObjectID: ""
** end
API Reference Guide
xStatus
xStatus
Appendices
Copyright © 2014 Cisco Systems, Inc. All rights reserved.