Cisco TelePresence SX80 Reference Manual page 57

Cisco TelePresence SX80
Contents Introduction
xConfiguration NetworkServices HTTPS OCSP URL
Specify the URL of the OCSP responder (server) that will be used to check the certificate status.
Requires user role: ADMIN
Value space: <S: 0, 255>
Format: String with a maximum of 255 characters.
Example: xConfiguration NetworkServices HTTPS OCSP URL: "http://ocspserver.company.
com:81"
xConfiguration NetworkServices Medianet Metadata
Switch On or Off the capability to tag media flows with metadata related to the Cisco Medianet
deployment.
Requires user role: ADMIN
Value space: <Off/On>
Off: Media flows will not be tagged with such metadata.
On: Media flows will be tagged with such metadata.
Example: xConfiguration NetworkServices Medianet Metadata: Off
xConfiguration NetworkServices NTP Mode
The Network Time Protocol (NTP) is used to synchronize the system's time and date to a reference
time server. The time server will be queried regularly for time updates.
Requires user role: ADMIN
Value space: <Auto/Manual/Off>
Auto: The system will use an NTP server for time reference. As default, the server address
will be obtained from the network's DHCP server. If a DHCP server is not used, or if the DHCP
server does not provide an NTP server address, the NTP server address that is specified in the
NetworkServices NTP Address setting will be used.
Manual: The system will use the NTP server that is specified in the NetworkServices NTP Address
setting for time reference.
Off: The system will not use an NTP server. The Network Services NTP Address setting will be
ignored.
Example: xConfiguration NetworkServices NTP Mode: Auto
Codec SX80 API Reference Guide TC7.3, OCTOBER 2015.
D15107.05
About the API xConfiguration xConfiguration
xConfiguration NetworkServices NTP Address
xConfiguration NetworkServices SNMP Mode
xConfiguration NetworkServices SNMP Host [1..3] Address
57
xCommand
The address of the NTP server that will be used when NetworkServices NTP Mode is set to Manual,
and when NetworkServices NTP Mode is set to Auto and no address is supplied by a DHCP server.
Requires user role: ADMIN
Value space: <S: 0, 64>
Format: A valid IPv4 address, IPv6 address or DNS name.
Example: xConfiguration NetworkServices NTP Address: "0.tandberg.pool.ntp.org"
SNMP (Simple Network Management Protocol) is used in network management systems to monitor
network-attached devices (routers, servers, switches, projectors, etc) for conditions that warrant
administrative attention. SNMP exposes management data in the form of variables on the managed
systems, which describe the system configuration. These variables can then be queried (set to
ReadOnly) and sometimes set (set to ReadWrite) by managing applications.
Requires user role: ADMIN
Value space: <Off/ReadOnly/ReadWrite>
Off: Disable the SNMP network service.
ReadOnly: Enable the SNMP network service for queries only.
ReadWrite: Enable the SNMP network service for both queries and commands.
Example: xConfiguration NetworkServices SNMP Mode: ReadOnly
Enter the address of up to three SNMP Managers.
The system's SNMP Agent (in the codec) responds to requests from SNMP Managers (a PC
program etc.), for example about system location and system contact. SNMP traps are not
supported.
Requires user role: ADMIN
Value space: <S: 0, 64>
Format: A valid IPv4 address, IPv6 address or DNS name.
Example: xConfiguration NetworkServices SNMP Host 1 Address: ""
API Reference Guide
xStatus Appendices
Copyright © 2015 Cisco Systems, Inc. All rights reserved.