Cisco TelePresence SX80 Reference Manual page 90

Cisco TelePresence SX80
Contents Introduction
xCommand Audio LocalInput AddConnector
Attach an input connector to the local input given by the input ID. A connector is defined by its type
and ID.
This command is mainly intended for internal use by the TC console. TC console automatically
generates a start-up script that makes the command persistent over a reboot. To use this command
outside of TC console, you have to include it in a start-up script in order to make the setting persis-
tent over a reboot. For more information on star-up scripts and TC console see the administrator
guide for your codec.
InputId: A unique identifier for the local input.
ConnectorType: Select the connector type.
ConnectorId: Select a connector.
Requires user role: ADMIN
Parameters:
InputId(r): <0..65534>
ConnectorType(r): <HDMI/Line/Microphone>
ConnectorId(r): <1..8>
Example:
xCommand Audio LocalInput AddConnector InputId: 3 ConnectorType: Line
ConnectorId: 1
xCommand Audio LocalInput Remove
Remove the local input given by the input ID.
This command is mainly intended for internal use by the TC console. TC console automatically
generates a start-up script that makes the command persistent over a reboot. To use this command
outside of TC console, you have to include it in a start-up script in order to make the setting persis-
tent over a reboot. For more information on star-up scripts and TC console see the administrator
guide for your codec.
InputId: A unique identifier for the local input.
Requires user role: ADMIN
Parameters:
InputId(r): <0..65534>
Example:
xCommand Audio LocalInput Remove InputID: 2
Codec SX80 API Reference Guide TC7.3, OCTOBER 2015.
D15107.05
About the API xConfiguration
xCommand Audio LocalInput RemoveConnector
90
xCommand xCommand
Detach an input connector from the local input given by the input ID. A connector is defined by its
type and ID.
This command is mainly intended for internal use by the TC console. TC console automatically
generates a start-up script that makes the command persistent over a reboot. To use this command
outside of TC console, you have to include it in a start-up script in order to make the setting persis-
tent over a reboot. For more information on star-up scripts and TC console see the administrator
guide for your codec.
InputId: A unique identifier for the local input.
ConnectorType: Select the connector type.
ConnectorId: Select the connector.
Requires user role: ADMIN
Parameters:
InputId(r): <0..65534>
ConnectorType(r): <HDMI/Line/Microphone>
ConnectorId(r): <1..8>
Example:
xCommand Audio LocalInput RemoveConnector InputId: 3 ConnectorType: Line
ConnectorId: 1
API Reference Guide
xStatus Appendices
Copyright © 2015 Cisco Systems, Inc. All rights reserved.