Cisco TelePresence SX80 Reference Manual page 46

Application programmer interface (api)
Hide thumbs Also See for TelePresence SX80:
Table of Contents

Advertisement

Cisco TelePresence SX80
Contents
Introduction
xConfiguration H323 Profile [1..1] Authentication Mode
Set the authentication mode for the H.323 profile.
Requires user role: ADMIN
Value space: <Off/On>
Off: If the H.323 Gatekeeper Authentication Mode is set to Off the system will not try to authenti-
cate itself to a H.323 Gatekeeper, but will still try a normal registration.
On: If the H.323 Gatekeeper Authentication Mode is set to On and a H.323 Gatekeeper indicates
that it requires authentication, the system will try to authenticate itself to the gatekeeper. Requires
the Authentication LoginName and Authentication Password to be defined on both the codec and
the Gatekeeper.
Example: xConfiguration H323 Profile 1 Authentication Mode: Off
xConfiguration H323 Profile [1..1] Authentication LoginName
The system sends the Authentication Login Name and the Authentication Password to a H.323
Gatekeeper for authentication. The authentication is a one way authentication from the codec to
the H.323 Gatekeeper, i.e. the system is authenticated to the gatekeeper. If the H.323 Gatekeeper
indicates that no authentication is required, the system will still try to register. Requires the H.323
Gatekeeper Authentication Mode to be enabled.
Requires user role: ADMIN
Value space: <S: 0, 50>
Format: String with a maximum of 50 characters.
Example: xConfiguration H323 Profile 1 Authentication LoginName: ""
xConfiguration H323 Profile [1..1] Authentication Password
The system sends the Authentication Login Name and the Authentication Password to a H.323
Gatekeeper for authentication. The authentication is a one way authentication from the codec to
the H.323 Gatekeeper, i.e. the system is authenticated to the gatekeeper. If the H.323 Gatekeeper
indicates that no authentication is required, the system will still try to register. Requires the H.323
Gatekeeper Authentication Mode to be enabled.
Requires user role: ADMIN
Value space: <S: 0, 50>
Format: String with a maximum of 50 characters.
Example: xConfiguration H323 Profile 1 Authentication Password: ""
Codec SX80 API Reference Guide TC7.3, OCTOBER 2015.
D15107.05
About the API
xConfiguration
xConfiguration
xConfiguration H323 Profile [1..1] CallSetup Mode
xConfiguration H323 Profile [1..1] Encryption KeySize
xConfiguration H323 Profile [1..1] Gatekeeper Discovery
46
xCommand
The H.323 Call Setup Mode defines whether to use a Gatekeeper or Direct calling when establishing
H323 calls.
NOTE: Direct H.323 calls can be made even though the H.323 Call Setup Mode is set to Gatekeeper.
Requires user role: ADMIN
Value space: <Direct/Gatekeeper>
Direct: An IP address must be used when dialing in order to make the H323 call.
Gatekeeper: The system will use a Gatekeeper to make a H.323 call. When selecting this option
the H323 Profile Gatekeeper Address and H323 Profile Gatekeeper Discovery settings must also
be configured.
Example: xConfiguration H323 Profile 1 CallSetup Mode: Gatekeeper
Define the minimum or maximum key size for the Diffie-Hellman key exchange method, which is
used when establishing the Advanced Encryption Standard (AES) encryption key.
Requires user role: ADMIN
Value space: <Min1024bit/Max1024bit/Min2048bit>
Min1024bit: The minimum size is 1024 bit.
Max1024bit: The maximum size is 1024 bit.
Min2048bit: The minimum size is 2048 bit.
Example: xConfiguration H323 Profile 1 Encryption MinKeySize: Max1024bit
Determine how the system shall register to a H.323 Gatekeeper.
Requires user role: ADMIN
Value space: <Manual/Auto>
Manual: The system will use a specific Gatekeeper identified by the Gatekeeper's IP address.
Auto: The system will automatically try to register to any available Gatekeeper. If a Gatekeeper
responds to the request sent from the codec within 30 seconds this specific Gatekeeper will
be used. This requires that the Gatekeeper is in auto discovery mode as well. If no Gatekeeper
responds, the system will not use a Gatekeeper for making H.323 calls and hence an IP address
must be specified manually.
Example: xConfiguration H323 Profile 1 Gatekeeper Discovery: Manual
API Reference Guide
xStatus
Appendices
Copyright © 2015 Cisco Systems, Inc. All rights reserved.

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents