Prepare The System For A Run - GE AKTA avant Operating Instructions Manual

5

Prepare the system for a run

About this chapter
This chapter describes the preparations necessary before starting a run.
In this chapter
This chapter contains the following sections:
Section
5.1 Before you prepare the system
5.2 Prepare the flowpath
5.3 Prime buffer inlets and purge system pumps
5.4 Connect a column
5.5 Set pressure alarms
5.6 Calibrate the pH monitor
5.7 Prepare the built-in fraction collector
5.8 Prepare for a run at cold temperature
ÄKTA avant Operating Instructions 29101556 AB
5 Prepare the system for a run
See page
104
106
111
112
117
119
121
128
103