The System Control Module - GE AKTA avant Operating Instructions Manual

3.2.2

The System Control module

Introduction
The System Control module is used to start, view, and control a manual or method run.
System Control panes
As seen in the following illustration, three panes are shown in the System Control module
by default.
The Run Data pane (1) presents current data in numerical values.
The Chromatogram pane (2) illustrates data as curves during the entire run.
The current flow path is illustrated in the Process Picture (3), which allows manual inter-
actions with the system and provides feedback on run parameters.
Note:
ÄKTA avant Operating Instructions 29101556 AB
On the View menu, click Run Log to open the Run Log pane which presents
all registered actions.
3 System description
3.2 UNICORN software
3.2.2 The System Control module
1
2
3
49