Prepare The System - GE AKTAprocess Operating Instructions Manual

5 Operation

5.1 Prepare the system

5.1 Prepare the system
Introduction
This section describes the steps that should be performed to prepare ÄKTAprocess for
a run.
Prerequisites
Before ÄKTAprocess is taken into operation, make sure that all procedures in the relevant
chapters and sections have been performed, including:
•
•
In this section
Section
5.1.1 Start the system and software
5.1.2 Prepare system components
5.1.3 Priming and leakage test
5.1.4 Set pressure control valve parameters
5.1.5 Final checks
112
Chapter 4 Installation, on page 81 and
Actions before operation in Section 6.1 User maintenance schedule, on page 130
ÄKTAprocess Operating Instructions 29-0252-49 AA
See page
113
115
118
121
123