Other Regulations And Standards - GE AKTA avant Operating Instructions Manual

1 Introduction
1.3 Regulatory information

1.3.4 Other regulations and standards

1.3.4 Other regulations and standards
Introduction
This section describes the standards that apply to the ÄKTA avant system.
Environmental conformity
This product conforms to the following environmental requirements.
Requirement
2012/19/EU
China RoHS
Standards, machinery and
electrical equipment
Standard requirements fulfilled by this product are summarized in the table below.
Standard
EN ISO 12100
EN 61010-1, IEC 61010-1,
UL 61010-1, CAN/CSA-
C22.2 No. 61010-1
EN 61326-1
ICES-001/NMB-001
12
Title
Waste Electrical and Electronic Equipment (WEEE) Directive
Management Methods for the Restriction of the Use of Haz-
ardous Substances in Electrical and Electronic Products.
Description
Safety of machinery. General principles for design. Risk
assessment and risk reduction.
Safety requirements for electrical equipment for mea-
surement, control, and laboratory use - Part 1: General
requirements.
Electrical Equipment for Measurement, Control, and
Laboratory Use-EMC requirements-Part 1: General re-
quirements
(Emission according to CISPR 11, Group 1, class A)
Industrial, Scientific and Medical (ISM) Radio Frequency
Generators (Canada)
ÄKTA avant Operating Instructions 29101556 AB