Site Environment - GE AKTA avant Operating Instructions Manual

4 Installation
4.1 Site preparation

4.1.3 Site environment

4.1.3 Site environment
Introduction
This section describes the environmental requirements for installation of the ÄKTA avant
instrument.
Environmental conditions
The following general requirements must be fulfilled:
•
•
•
The installation site must comply with the following specifications.
Environmental requirements
Parameter
Allowed location
Ambient temperature, operation
Ambient temperature, storage
Relative humidity, operating
Relative humidity, non-operating
Altitude, operation
Pollution degree of the intended environ-
ment
58
The room must have exhaust ventilation
The instrument should not be exposed to sources of heat, such as direct sunlight
Dust in the atmosphere should be kept to a minimum
Requirement
Indoor use only
4°C to 35°C
-25°C to 60°C
20% to 95%, noncondensing
20% to 95%, noncondensing
Up to 2000 m
Pollution degree 2
ÄKTA avant Operating Instructions 29101556 AB