Modular Optics - Cisco SCE 8000 Installation And Configuration Manual

Modular Optics

Modular Optics
The SPAs implement 10 GBE small form-factor pluggable (XFP) optical transceivers to provide network
connectivity (See
provide network connectivity.
Note It is highly recommended to use only the XFP modules listed as supported in this document. Use of
unsupported or unqualified XFP modules may affect reliability or operation.
Figure 2-5
The interface connector on the 1-Port 10-Gigabit Ethernet SPA is a fiber optic receiver that supports one
XFP.
The types of optics modules that have been qualified for use with the 1-Port 10-Gigabit Ethernet SPA on
the Cisco SCE 8000 platform are as follows:
•
•
•
•
Cisco SCE8000 GBE Installation and Configuration Guide
2-8
Figure 2-5). An XFP module is a transceiver device that mounts into the front panel to
10 GBE Small Form-factor Pluggable (XFP0)
XFP-10GLR-OC192SR
XFP-10GER-OC192IR
XFP-10GZR-OC192LR
XFP-10G-MM-SR
Chapter 2 Introduction to the Cisco SCE 8000 10 GBE Platform