Cisco SCE 8000 Installation And Configuration Manual page 208

Informational Messages, Severity Level 6
Error Message %LOCAL7-6-SET_ENABLED_CFG_USER:"Management agent was <state> by user
configuration."
Explanation
Cisco SCE is enabled or disabled by user configuration.
In this message, state indicates whether the management agent is enabled or disabled.
Recommended Action
Error Message %LOCAL7-6-SET_ENABLED_TO_DEFAULT:"Management agent status was set to
its default configuration.
Explanation
was set to its default configuration.
Recommended Action
Error Message %LOCAL7-6-RESTART_CALLED :"Management agent restart procedure called."
Explanation
Cisco SCE.
Recommended Action
Error Message %LOCAL7-6-RESTART_FINISHED:"Management agent restart procedure
finished successfully."
Explanation
successful.
Recommended Action
Error Message %LOCAL7-6-RESTART_FROM_JAVA_CALLED :"Management agent self restart
procedure called."
Explanation
Recommended Action
Error Message %LOCAL7-6-UM_AGENT_IS_UP:"Management agent is up."
Explanation
Recommended Action
Cisco SCE8000 GBE Installation and Configuration Guide
C-12
This message is displayed to indicate that the user information management agent in
None.
This message is displayed to indicate that the user information management agent status
None.
This message is displayed when the management agent restart procedure is called by
None.
This message is displayed when the management agent JVM restart procedure is
None.
This message is displayed when the management agent is restarted from JVM.
None.
This message is displayed when the user management agent is up and running.
None.
Appendix C Cisco Service Control Engine System Log Messages