Cisco SCE 8000 Installation And Configuration Manual page 221

Appendix C Cisco Service Control Engine System Log Messages
Error Message %LOCAL7-6-DBG_INIT_OPENED_NEW_FILES: "DBG - failed opening files for
read & write. New files were opened, old files deleted."
Explanation
write operations. The new files are opened and the old files deleted. This occurs when an attempt is
made to initialize the debug log files and these files are not found.
Recommended Action
Error Message %LOCAL7-6-TESTING_INFO_LEVEL: "syslog test message for info severity
level"
Explanation
Recommended Action
Error Message %LOCAL7-6-SESSION_BAD_LOGIN: "Bad password attempted on a CLI session
from <%s>."
Explanation
the CLI session.
Recommended Action
Error Message %LOCAL7-6-LINK_UP_TRAP: "Link up trap generated for Mng interface %d."
Explanation
Recommended Action
Error Message %LOCAL7-6-SNMP_TRAP: "<%s>"
Explanation
Recommended Action
Error Message %LOCAL7-6-AUTHENTICATION_FAILURE_TRAP: "Authentication failure."
Explanation
Recommended Action
Error Message %LOCAL7-6-OPERATIONAL_STATUS_WARNING_TRAP: "<%s>"
Explanation
one of the following states occur:
–
–
This message is displayed when the DBG fails to open the files to perform read and
None.
This message is displayed to indicate the information severity level.
None.
This message is displayed when a wrong password is given by a user while logging into
None.
This trap is generated by the SNMP when the managing interface is up.
None.
All types of SNMP traps generate this message with the details of the traps.
None.
This message is generated when authentication failure of an SNMP trap occurs.
None.
This SNMP trap is generated to indicate that the Cisco SCE platform is operational until
Link on one of the line ports is down
Management port link is down
Informational Messages, Severity Level 6
Cisco SCE8000 GBE Installation and Configuration Guide
C-25