Cisco SCE 8000 Installation And Configuration Manual page 241

Appendix C Cisco Service Control Engine System Log Messages
Warning Message %LOCAL7-4-DBG_INIT_SCROLL_TO_END_FAILED: "DBG Init failure
Explanation
Recommended Action
Warning Message %LOCAL7-4-DBG_INIT_SCROLL_TO_NEXT_FAILED: "DBG Init failure
Explanation
–
–
Recommended Action
Warning Message %LOCAL7-4-DBG_CLOSE_FAIL_SAVE_HIST_FILES: "DBG Close failure
Explanation
–
–
–
Recommended Action
Warning Message %LOCAL7-4-USER_FLUSH_FILES_FAILED: "User log
Explanation
Recommended Action
Warning Message %LOCAL7-4-USER_SCROLL_TO_END_FAILED: "User log
Explanation
Recommended Action
Warning Message %LOCAL7-4-USER_SECURE_FILES_FAILED: "User log
Explanation
in binary format, in read mode.
Recommended Action
This message is generated when the scrolling operation to the end of the file fails.
None.
This message is generated due to the following reasons:
The log file is not available and the creation of a new file fails.
The space in the file is not enough for the next message, and the creation of a new file fails.
None.
This message is generated while closing the histogram file due to the following reasons:
When the histogram file is not open.
When there is no attempt to close the histogram file if it is already open.
When serialization of a log fails or the histogram file fails while saving the file.
None.
This message is generated when the task of flushing a user log fails.
None.
This message is generated when a user log file reaches the maximum file size.
None.
The message is generated when an error occurs while opening a user log file, which is
None.
Warning Messages, Severity Level 4
Cisco SCE8000 GBE Installation and Configuration Guide
C-45