Cisco SCE 8000 Installation And Configuration Manual page 216

Informational Messages, Severity Level 6
Error Message %LOCAL7-6-LINKMODE_SNIFFING_TRAP: "<%s>"
Explanation
Recommended Action
Error Message %LOCAL7-6-REMOVE_ALL_INTRODUCED_MAPPINGS: "Removing all introduced
subscribers' mappings."
Explanation
the database.
Recommended Action
Error Message %LOCAL7-6-SYNC_START: "Subscribers' database: starting
synchronization process."
Explanation
management is started.
Recommended Action
Error Message %LOCAL7-6-SYNC_END: "Subscribers' database: synchronization process
done."
Explanation
management is stopped.
Recommended Action
Error Message %LOCAL7-6-REMOVE_ALL_ANONYMOUS_GROUPS: "Removing all
anonymous-subscribers groups."
Explanation
anonymous subscriber groups.
Recommended Action
Error Message %LOCAL7-6-SET_ALL_TEMPLATES_TO_DEFAULT: "Setting all subscriber
templates to default values."
Explanation
subscriber templates to their default values.
Recommended Action
Cisco SCE8000 GBE Installation and Configuration Guide
C-20
This trap is generated when the Cisco SCE link mode is set to sniffing state.
None.
This message is displayed before all the external subscriber mappings are removed from
None.
This message is displayed when synchronization of the party database using external
None.
This message is displayed when synchronization of the party database using external
None.
This message is displayed in response to a command that is issued to remove all the
None.
This message is displayed in response to a command that is issued to set all the
None.
Appendix C Cisco Service Control Engine System Log Messages