Cisco SCE 8000 Installation And Configuration Manual page 238

Warning Messages, Severity Level 4
Warning Message %LOCAL7-4-DBG_SCROLL_TO_NEXT_FAILED1: "DBG failure
Explanation
when a user tries to scroll the file.
Recommended Action
Warning Message %LOCAL7-4-DBG_SCROLL_TO_NEXT_FAILED2: "DBG failure
Explanation
DBG or statistics log file with memory size exceeding the maximum limit.
Recommended Action
Warning Message %LOCAL7-4-DBG_REFRESH_PROBLEM: "DBG problem
Explanation
log file. The old logs are deleted and new logs are created automatically.
Recommended Action
Warning Message %LOCAL7-4-DBG_REFRESH_FAILED: "DBG failure
Explanation
cannot be recovered even after refreshing the debug log file or the statistics log file.
Recommended Action
Warning Message %LOCAL7-4-DBG_MESSAGE_FAILED_WRITE: "DBG message failed - failed to
write message"
Explanation
the DBG or statistics log file.
Recommended Action
Warning Message %LOCAL7-4-DBG_MESSAGE_FAILED_WRITE: "DBG message failed - failed to
write message"
Explanation
operation in the DBG or statistics log file.
Recommended Action
Warning Message %LOCAL7-4-DBG_CLEAR_FAILED: "DBG failure
Explanation
DBG or statistics log files or while clearing the histogram files.
Recommended Action
Cisco SCE8000 GBE Installation and Configuration Guide
C-42
This message is generated when the current DBG or statistics log file does not open
None.
This message is generated while reopening a DBG or statistics log file after closing a
None.
This message is generated when an error occurs while refreshing the DBG or statistics
None.
This message is generated while deleting the debug device when the corresponding file
None.
This message is generated when an error occurs while performing a write operation in
None.
This warning message is generated when an error occurs while performing a write
None.
This message is generated when an error occurs while clearing the log messages in the
None.
Appendix C Cisco Service Control Engine System Log Messages