Cisco SCE 8000 Installation And Configuration Manual page 227

Appendix C Cisco Service Control Engine System Log Messages
Error Message %LOCAL7-6-SESSION_DENIED_NO_PASSWORD:"A telnet session from <%s> was
terminated - user password not supplied."
Explanation
has not been received.
Recommended Action
Error Message %LOCAL7-6-SESSION_ENDED:"A telnet session from <%s> ended."
Explanation
Recommended Action
Error Message %LOCAL7-6-DENIED_NEW_REQUEST:"An HTTP request from <%s> has been
denied - IP address not in ACL."
Explanation
address is not available in the ACL.
Recommended Action
Error Message %LOCAL7-6-SM_CONNECTION_UP_TRAP:"<%s>"
Explanation
Recommended Action
Error Message %LOCAL7-6-SM_CONNECTION_DOWN_TRAP:"<%s>"
Explanation
Recommended Action
Error Message %LOCAL7-6-SERVER_STARTED:"SSH server started."
Explanation
Recommended Action
Error Message %LOCAL7-6-SERVER_STOPPED:"SSH server stopped."
Explanation
Recommended Action
This message is generated when a telnet access is denied because of the user password
None.
This message is generated when a telnet session is terminated successfully.
None.
This message is generated when a web server access request is denied because the IP
None.
This SNMP trap is generated when the Subscriber Manager connection is up.
None.
This SNMP trap is generated when the Subscriber Manager connection is down.
None.
This message is generated when the RPC server is successfully started.
None.
This message is generated when the RPC server is stopped successfully.
None.
Informational Messages, Severity Level 6
Cisco SCE8000 GBE Installation and Configuration Guide
C-31