Cisco SCE 8000 Installation And Configuration Manual page 219

Appendix C Cisco Service Control Engine System Log Messages
Error Message %LOCAL7-6-DEBUG_SSH_ACCESS: "<%s> access to debug-ssh (port 2200)"
Explanation
Recommended Action
Error Message %LOCAL7-6-BIND_VTY_SERVICE : "Telnet service bound to management vlan
(%u)"
Explanation
management configurations, along with the VLAN ID.
Recommended Action
Error Message %LOCAL7-6-UNBIND_VTY_SERVICE: "Telnet service unbound from management
vlan (%u)"
Explanation
VLAN.
Recommended Action
Error Message %LOCAL7-6-BIND_SSH_SERVICE: "SSH service bound to management vlan
(%u)"
Explanation
Recommended Action
Error Message %LOCAL7-6-UNBIND_SSH_SERVICE: "SSH service unbound from management
vlan (%u)"
Explanation
VLAN.
Recommended Action
Error Message %LOCAL7-6-SERVER_ENABLED: "Web server enabled."
Explanation
Recommended Action
Error Message %LOCAL7-6-SERVER_DISABLED: "Web server disabled."
Explanation
Recommended Action
This message is displayed when debug SSH access to port 2200 is enabled.
None.
This message provides the details about the telnet service that is added in VLAN
None.
This message is displayed when the telnet service is unbound from the management
None.
This message is displayed when the SSH service is bound with the management VLAN.
None.
This message is displayed when the SSH service is unbound from the management
None.
This message is displayed when the web server is enabled.
None.
This message is displayed when the web server is disabled.
None.
Informational Messages, Severity Level 6
Cisco SCE8000 GBE Installation and Configuration Guide
C-23