Cisco SCE 8000 Installation And Configuration Manual page 220

Informational Messages, Severity Level 6
Error Message %LOCAL7-6-BIND_SNMP_SERVICE: "SNMP service binded to management vlan
(%u)"
Explanation
Recommended Action
Error Message %LOCAL7-6-UNBIND_SNMP_SERVICE: "SNMP service un-binded from management
vlan (%u)"
Explanation
VLAN.
Recommended Action
Error Message %LOCAL7-6-NO_CONNECTIONS_OPEN: "No Formatter connection is open on
category %d."
Explanation
Recommended Action
Error Message %LOCAL7-6-MSG: "<%s>"
Explanation
requester ID.
Recommended Action
Error Message %LOCAL7-6-USER_FILES_CLEAR: "Cleared user log files"
Explanation
user-file-log command.
Recommended Action
Error Message %LOCAL7-6-LOGGER_STAM: "This a message with 5 parameters one %d two %d
three %d four %d five %d"
Explanation
use.
Recommended Action
Error Message %LOCAL7-6-LOGGER_USER_INFO_MSG: "<%s>"
Explanation
using the logger add-user-message command.
Recommended Action
Cisco SCE8000 GBE Installation and Configuration Guide
C-24
This message is displayed when the SNMP service is bound to the management VLAN.
None.
This message is displayed when the SNMP service is unbound from the management
None.
This message is displayed when no formatter connection is open in a category.
None.
This message provides details about the RPC client request to the server with its
None.
This message is displayed when user log files are cleared using the clear logger device
None.
This message is displayed by the debug message test function that is currently not in
None.
This message is displayed while adding a user message to the corresponding user log
None.
Appendix C Cisco Service Control Engine System Log Messages