Cisco SCE 8000 Installation And Configuration Manual page 214

Informational Messages, Severity Level 6
Error Message %LOCAL7-6-UNASSIGNCFG_OK: "Current application on slot slot-num was
successfully un-assigned."
Explanation
card slot.
In this message, slot-num indicates the slot number.
Recommended Action
Error Message %LOCAL7-6-REPLACE_CFG_START:"Starting application replace of
application file
Explanation
application for the corresponding line card slot.
Recommended Action
Error Message %LOCAL7-6-LOGGER_INIT_SUCCESS: "Logger task Initialized successfully"
Explanation
Recommended Action
Error Message %LOCAL7-6-EXIT_BY_REQUEST : "Logger exit request received. Exiting
logger ..."
Explanation
message from an event.
Recommended Action
Error Message %LOCAL7-6-LINE_ATTACK_FILES_CLEAR: "Cleared line-attack log files"
Explanation
are stored in a line-attack log file.
Recommended Action
Error Message %LOCAL7-6-ACTIVE_CONNECTION_OPEN: "Formatter active connection opened
Explanation
number, and the category of the connection that is in active state.
Recommended Action
Cisco SCE8000 GBE Installation and Configuration Guide
C-18
This message is displayed when an application is successfully unassigned from a line
None.
This message is displayed while replacing the existing application with a new
None.
This message is displayed when logger task initialization is successful.
None.
This message is displayed when the logger task exits after receiving an exit request
None.
This message is displayed when the line-attack log file is cleared. Line-attack messages
None.
This message is displayed to provide the details of the RDR formatter IP address, port
None.
Appendix C Cisco Service Control Engine System Log Messages