Cisco SCE 8000 Installation And Configuration Manual page 109

Chapter 6 Cabling the Line Ports and Completing the Installation
Testing Connectivity: Examining Link LEDs and Counters
The following example shows the counters of the first Ten Gigabit Ethernet interface:
SCE8000> show interface TenGigabitEthernet 3/0/0 counters
In total octets: 100
In good unicast packets: 90
In good multicast packets: 0
In good broadcast packets: 10
In packets discarded: 0
In packets with CRC/Alignment error: 0
In undersized packets: 0
In oversized packets: 0
Out total octets: 93*2^32+1022342538
Out unicast packets: 858086051
Out non unicast packets: 0
Out packets discarded: 0
How to View the User Log Counters
You should view the user log for errors that occurred during the installation process.
To view the user log counters, enter show logger device User-File-Log counters at the SCE8000>
Step 1
prompt and press Enter.
SCE8000# show logger device user-file-log counters
Logger device User-File-Log counters:
Total info messages: 1
Total warning messages: 0
Total error messages: 0
Total fatal messages: 0
If there are "Total error messages" or "Total fatal messages", use the show logger device User-File-Log
command to display details about the errors.
Cisco SCE8000 GBE Installation and Configuration Guide
6-17