Cisco SCE 8000 Installation And Configuration Manual page 209

Appendix C Cisco Service Control Engine System Log Messages
Error Message %LOCAL7-6-UM_AGENT_IS_DOWN:"Management agent is down."
Explanation
Recommended Action
Error Message %LOCAL7-6-EXTERNAL_BYPASS_ACTIVATED:"Activating external bypass
device due to user request"
Explanation
device.
Recommended Action
Error Message %LOCAL7-6-EXTERNAL_BYPASS_DEACTIVATED:"Deactivating external bypass
device due to user request"
Explanation
device.
Recommended Action
Error Message %LOCAL7-6-EXTERNAL_BYPASS_ACTIVATED_LINK_CUTOFF:"External bypass
device activated and detected on link num, taking the link down for num-sec
milliseconds."
Explanation
restarted before external bypass is activated. Restarting the link involves deactivating the link for a
few milliseconds and then reactivating it.
In this message, num indicates the link, and num-sec indicates the number of milliseconds.
Recommended Action
Error Message %LOCAL7-6-EXTERNAL_BYPASS_ACTIVATED_TEST_PACKETS_ON_HOLD:"During
external bypass device activation procedure, test packets are disabled for num-sec
milliseconds."
Explanation
external bypass device activation period. This is done to prevent packets from being dropped.
In this message, num indicates the link.
Recommended Action
This message is displayed when the user management agent is down.
None.
This message is displayed when a user manually activates the external optical bypass
None.
This message is displayed when a user manually deactivates the external optical bypass
None.
This message is displayed when preparing a link for external bypass. The link is
None.
This message is displayed when the test packet mechanism is put on hold during the
None.
Informational Messages, Severity Level 6
Cisco SCE8000 GBE Installation and Configuration Guide
C-13