Cisco SCE 8000 Installation And Configuration Manual page 246

Warning Messages, Severity Level 4
Warning Message %LOCAL7-4-UNBIND_SNMP_SERVICE_FAILED: "Fail to un-bind SNMP service
from management vlan (%u)"
Explanation
management VLAN.
Recommended Action
Warning Message %LOCAL7-4-HOSTNAME_NOT_FOUND: "Formatter connection host name was
not found
Explanation
name is not found.
Recommended Action
Warning Message %LOCAL7-4-LOGGER_USER_WARN_MSG: "<%s>"
Explanation
Recommended Action
Warning Message %LOCAL7-4-DBG_SECURE_FILES_FAILED: "DBG failure: Failed to secure
DBG files."
Explanation
not corrupt.
Recommended Action
Warning Message %LOCAL7-4-DBG_MESSAGE_MASKED: "DBG masked message - severity = %d ,
module = %u"
Explanation
a given severity, from the corresponding module to the debug log.
Recommended Action
Warning Message %LOCAL7-4-DBG_MESSAGE_FAILED_NO_FILE: "DBG message failed - no file
attached"
Explanation
Recommended Action
Cisco SCE8000 GBE Installation and Configuration Guide
C-50
This message is displayed when Cisco SCE fails to unbind the SNMP service to a given
None.
This message is displayed when the formatter connection of the corresponding host
None.
This message is displayed when a warning message is added to a user log file.
None.
This message is generated when Cisco SCE fails to ensure that the dbg file exists and is
None.
This message is generated when Cisco SCE tries to write a masked debug message with
None.
This message is displayed when Cisco SCE tries to write a file that does not exist.
None.
Appendix C Cisco Service Control Engine System Log Messages