Cisco 340 Series Configuration Manual page 95

Chapter 2 Configuring Local CLI - CLISH
SSID Configuration Mode
This section contains Service Set Identifier (SSID) configuration mode commands.
the functions these commands perform.
Table 2-6
Command
broadcast ssid
do
encryption mode (open,
shared, or WEP configuration)
encryption mode (WPA
configuration)
exit
no
radius-server
wep-keyid
Configuration for SSID will take effect after exiting the SSID configuring mode.
Note
OL-29491-01
SSID Configuration Commands
Function
Enables or disables broadcast of the Service Set Identifier (SSID)
name.
Executes THE user EXEC or privileged EXEC commands from
global configuration mode or other configuration modes or
submodes.
Configures open, shared, Wi-Fi Protected Access (WPA),
WPA1WPA2, WPA2, WPA2PSK, WPAPSK, and
WPAPSKWPA2PSK authentication and associated encryption for
the access point.
Exits the SSID configuration mode.
Removes the configuration for a command or sets the command to
default.
Configures the name of a RADIUS server.
Configures the Wired Equivalent Privacy (WEP) encryption.
Cisco Edge 340 Series Software Configuration Guide, Release 1.0
wmm
Table 2-6 describes
2-77