Configuring Coredump - Cisco 340 Series Configuration Manual

System Configuration
Figure 3-9

Configuring Coredump

Click Coredump in the left pane to configure the setting of core dump.
Enter the file name and the path in which you want to store the core dump in the Path field. The file can
Step 1
be created directly through the Path field.
Step 2 In the Size field, enter the size of the core dump in the left column and choose the unit of the core dump
size from the right drop-down list.
Click Apply to save the changes and Reset to restore the default values.
Step 3
Figure 3-10
Cisco Edge 340 Series Software Configuration Guide, Release 1.0
3-8
Syslog Information
Coredump Information
Chapter 3 Configuring the Web GUI
OL-29491-01