Cisco 340 Series Configuration Manual page 118

Network Configuration
Figure 3-19
Step 2 Edit the Security option or IP Address information as required, and click Save.
For detailed information about security options, see the
Note
page
Note If a wireless network is connected successfully, it cannot be edited or removed unless it is disconnected.
Remove a Wireless Connection
To remove a wireless connection, follow these steps:
Select the wireless connection that you want to remove from the Connections area.
Step 1
Step 2 Click
If a wireless network is connected successfully, it cannot be edited or removed unless it is disconnected.
Note
Connect a Wireless Network
To connect a wireless network, follow these steps:
Step 1 Select the wireless network that you want to connect from the Connections area.
Step 2 Click
If you have entered incorrect settings information when you add or edit wireless connections, the
message "
displayed in red. Correct the settings and click Save to connect the wireless network.
Cisco Edge 340 Series Software Configuration Guide, Release 1.0
3-14
Edit Wireless Connection
3-12.
in the Connections area to remove the wireless connection.
in the Connections area to connect the wireless network.
Connection failed, please correct settings and click save to reconnect
Chapter 3 Configuring the Web GUI
"Add a Wireless Connection" section on
" is
OL-29491-01