Cisco 340 Series Configuration Manual page 123

Chapter 3 Configuring the Web GUI
Enter the VPN server address, username, and password in the Server, Username, and Password fields.
Step 7
Check the Show password check box if you want the password to be displayed in plain text.
Step 8 Enter the value of the MTU and the MRU.
Choose the protocols that you want to use with this VPN connection.
Step 9
Choose the MPPE encryption type from the MPPE drop-down list:
Step 10
Enter the preshared key in the Pre-shared Key field.
Step 11
Choose Yes or No from the Redial drop-down list. If you choose Yes, you should enter values for the
Step 12
Timeout and Attempts fields
Figure 3-25
•
•
The value of Timeout multiplied by the value of Attempts is the time taken to connect the VPN server,
which is 20 seconds, at most.
Click Save to add the VPN connection.
Step 13
The VPN pane is updated to show the name and status of the new VPN connection.
Step 14
Add a VPN connection of IPSEC/L2TP/RSA Type
To add a VPN connection of IPSEC/L2TP/RSA type, follow these steps:
Click VPN in the left pane under the Network tab.
Step 1
Click
Step 2
The Add VPN connection window is displayed
Step 3
In the Add VPN connection window, enter the name of the VPN connection that you want to add in the
Step 4
Name field.
Check the Connect automatically check box if you want the Cisco Edge 340 Series device to
Step 5
automatically connect to this VPN.
Choose IPSEC/L2TP/RSA for the type of the VPN connection from the Type drop-down list.
Step 6
Enter the VPN server address, username, and password in the Server, Username, and Password fields.
Step 7
Check the Show password check box if you want the password to be displayed in plain text.
Enter the value of the MTU and the MRU.
Step 8
Choose the protocols that you want to use with this VPN connection.
Step 9
Choose the MPPE encryption type from the MPPE drop-down list:
Step 10
Enter the paths of the private key file, client certificate file, CA certificate file, and server certificate file.
Step 11
OL-29491-01
(Figure
Redial Information
Timeout—The maximum time to connect the VPN server every time.
Attempts—The maximum number of attempts made to connect the VPN server.
in the right pane.
3-25).
(Figure 3-26).
Cisco Edge 340 Series Software Configuration Guide, Release 1.0
Network Configuration
3-19