System Configuration - Cisco 340 Series Configuration Manual

Chapter 3 Configuring the Web GUI

System Configuration

After you log in to the web GUI, the System configuration window is displayed. You can configure the
Basic information, Account, Resolution, Date and Time, Syslog, and Coredump by clicking the
corresponding link on the left pane.
Configuring Basic Information
Click Basic in the left pane to configure the host name, enable or disable auto login, choose a locale, and
view the model, OS version, and RPM version
to restore the default values.
Change of locale needs reboot of the device to take effect.
Note
Figure 3-3
OL-29491-01
Basic Information
Cisco Edge 340 Series Software Configuration Guide, Release 1.0
(Figure 3-3). Click Apply to save the changes and Reset
System Configuration
3-3