Show Commands - Cisco 340 Series Configuration Manual

Chapter 2 Configuring Local CLI - CLISH

show Commands

User Configuration Mode
Use the following show commands in the user configuration mode to display the configuration on a
Cisco Edge 340 Series device:
•
•
•
•
•
•
•
•
Global Configuration Mode
Use the following show commands in the global configuration mode to display the configuration on a
Cisco Edge 340 Series device:
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
OL-29491-01
show cpu—Displays CPU information.
show mac—Displays MAC address.
show memory—Displays memory usage information.
show mount—Displays mount information.
show os-build-time—Displays release build time.
show os-version—Displays release version.
show os-install-time—Displays release installed time.
show storage—Displays storage information.
show all-running-config—Displays all information about the running configuration.
show all-startup-config—Displays all information about the startup configuration.
show running-config—Displays the configuration saved in the RAM.
show startup-config—Displays the configuration saved in the database.
show bluetooth—Displays bluetooth information.
show hdmi dev-name—Displays the device name of the connected HDMI monitor.
show hdmi current-resolution—Displays the current resolution of the connected HDMI monitor.
show hdmi support-resolution—Displays the connected HDMI monitor support resolution.
show hostname—Displays the hostname.
show ip interface—Displays the status of interfaces configured for IP.
show log-size—Displays the log size.
show monitor-full—Displays all the current monitor information.
show ssid—Displays the AP wireless ssid setting.
show wifi-mode—Displays the WiFi mode.
show vga dev-name—Displays the device name of the connected VGA monitor.
show vga current-resolution—Displays the current resolution of the connected VGA monitor.
show vga support-resolution—Displays the connected VGA monitor support resolution.
Cisco Edge 340 Series Software Configuration Guide, Release 1.0
wep-keyid
2-85