Configuring Snmp - Cisco 340 Series Configuration Manual

Chapter 3 Configuring the Web GUI
Refresh the Wireless Networks
To refresh the wireless networks, click
Disable the Wireless Function
To disable the wireless function, choose off from the Current Mode drop-down list in the Wireless tab.

Configuring SNMP

To enable or disable SNMP, or add, remove, and view SNMP users, click SNMP in the left pane under
the Network tab, as shown in
To enable SNMP, check the Enable SNMP check box.
Figure 3-20
Add an SNMP User
To add an SNMP user, follow these steps:
Step 1 Click
The Add snmp user screen is displayed, as shown in
Step 2
Enter the username in the Username field. The username can only consist of letters, numbers, and _. The
Step 3
first character must be a letter. The length of the username should be between 4 and 33 numbers.
Step 4 Enter the passwords in the Authpass and Privpass fields. The password can only consist of letters,
numbers, @, #, $, %, ^, &, +, =, and _. The length of the password should be between 8 and 32 numbers.
Step 5 Click Save to create the SNMP user.
OL-29491-01
Figure
Enabling SNMP
in the SNMP Users area.
in the Connections area.
3-20.
Figure 3-21.
Cisco Edge 340 Series Software Configuration Guide, Release 1.0
Network Configuration
3-15