Cisco 340 Series Configuration Manual page 28

traceroute
Global Configuration Mode Commands
This section contains global configuration mode commands.
commands perform.
Table 2-2
Command
configure terminal
copy running-config
startup-config
exit
export
help
import
ping
reboot
restore
show
traceroute
Cisco Edge 340 Series Software Configuration Guide, Release 1.0
2-10
Global Configuration Mode Commands
Function
Starts the Cisco Edge configuration file, and enters the global
configuration mode.
Saves the running configuration as the startup configuration file.
Exits the global configuration mode.
Exports the running-config or startup-config to a destination path.
Shows the descriptions of the interactive help system.
Imports a configuration file to running-config or startup-config.
Diagnoses the basic network connectivity, and verifies if the remote
device is reachable.
Halts and performs a cold restart.
Restores the default factory configuration.
Shows running system information.
Prints the route packets trace to the network host.
Chapter 2 Configuring Local CLI - CLISH
Table 2-2 describes the functions these
OL-29491-01