Cisco 340 Series Configuration Manual page 125

Chapter 3 Configuring the Web GUI
In the Add VPN connection window, enter the name of the VPN connection that you want to add in the
Step 4
Name field.
Step 5 Check the Connect automatically check box if you want the Cisco Edge 340 Series device to
automatically connect to this VPN.
Step 6 Choose CISCO for the type of the VPN connection from the Type drop-down list.
Step 7 Enter the VPN server address, username, and password in the Server, Username, and Password fields.
Check the Show password check box if you want the password to be displayed in plain text.
Enter the value of the MTU and the MRU.
Step 8
Step 9 Select PSK or Hybrid from the Auth Mode drop-down list.
Step 10 Enter the values in the Group Name, Group Password, Domain, Encryption, NAT traversal, and IKE DH
Group fields. If you choose Hybrid as the auth mode, enter the path of CA certificate file.
Step 11 Click Save to add the VPN connection.
Step 12 The VPN pane is updated to show the name and status of the new VPN connection.
Figure 3-27
OL-29491-01
Add VPN Connection—CISCO
Cisco Edge 340 Series Software Configuration Guide, Release 1.0
Network Configuration
3-21