Cisco 340 Series Configuration Manual page 74

channel number
channel number
To configure a channel number, which sets the frequency for an access point, use the channel number
command in the WiFi AP interface configuration mode.
Syntax Description auto
number
Command Default
The default channel number is 6.
Command Modes WiFi AP interface configuration
Usage Guidelines We recommend that you either use the default channel number or the automatic selection of the channel
number and only change the channel number if you experience interference in the network.
If you have to change the channel number, use the following numbers based on your location:
•
•
Cisco Edge 340 Series Software Configuration Guide, Release 1.0
2-56
channel number {auto | number}
Configures automatic selection of a channel number.
Channel number. Value between 1 to 13, 149, 153, 157, 161, and 165. The
default is 6.
China and Europe: 1 to 13
America: 1 to 11
Chapter 2 Configuring Local CLI - CLISH
OL-29491-01