Cisco 340 Series Configuration Manual page 121

Chapter 3 Configuring the Web GUI
Add a VPN connection of PPTP Type
To add a VPN connection of PPTP type, follow these steps:
Step 1 Click VPN in the left pane under the Network tab.
Click
Step 2
The Add VPN connection window is displayed, as shown in
Step 3
Figure 3-23
Step 4 In the Add VPN connection window, enter the name of the VPN connection that you want to add in the
Name field.
Step 5 Check the Connect automatically check box if you want the Cisco Edge 340 Series device to
automatically connect to this VPN.
Choose PPTF for the type of the VPN connection from the Type drop-down list:
Step 6
Step 7 Enter the VPN server address, username, and password in the Server, Username, and Password fields.
Check the Show password check box if you want the password to be displayed in plain text.
Enter the value of the Maximum Transmission Unit (MTU) and the Maximum Receive Unit (MRU).
Step 8
Choose the protocols that you want to use with this VPN connection.
Step 9
Step 10 Choose the MPPE encryption type from the MPPE drop-down list:
•
•
•
OL-29491-01
in the right pane.
Add VPN Connection—PPTP
None
MPPE
MPPE40
Figure
Cisco Edge 340 Series Software Configuration Guide, Release 1.0
Network Configuration
3-23.
3-17