Network Configuration - Cisco 340 Series Configuration Manual

Chapter 3 Configuring the Web GUI

Network Configuration

You can configure wired, wireless, SNMP, and VPN settings using the Network tab.
Configuring Wired Settings
Under the Network tab, click Wired in the left pane to configure Link Settings, enable or disable Wake
on Lan, and configure the IPv4 mode and the IPv6 mode. See
changes and Reset to restore the default values.
Figure 3-11
Configuring Wake on Lan
To enable the Wake on Lan function, select Manual from the Mode drop-down list, and Magic-Packet
for the Wake on Lan drop-down list. Then you can configure the Speed and Duplex settings. See
Figure
OL-29491-01
Wired Information
3-12.
Figure
Cisco Edge 340 Series Software Configuration Guide, Release 1.0
Network Configuration
3-11. Click Apply to save the
3-9