Cisco 340 Series Configuration Manual page 88

short-slot
short-slot
To configure the short-slot time when the access point functions in the 802.11g mode or the 802.11g
mixed mode, use the short-slot command in the WiFi AP interface configuration mode.
Note This command applies to the 802.11g mode or the 802.11g mixed mode.
Syntax Description on
off
Command Default Short-slot time is enabled.
Command Modes WiFi AP interface configuration
Usage Guidelines Enable the short-slot time for better throughput performance for 802.11g clients.
If there are mostly 802.11b clients in the network, disable the short-slot time.
Cisco Edge 340 Series Software Configuration Guide, Release 1.0
2-70
short-slot {on | off}
Enables short-slot time.
Disables short-slot time.
Chapter 2 Configuring Local CLI - CLISH
OL-29491-01