Honda Prelude 1993 Service Manual page 360

l
2 .
Replacoment
@@
oo not smoke when working on tha fuel system. Keep open llam6s away from your wolk a.sa,
Relieve fuel pressure (see page 11-1 14).
Disconnect the connectors from the fuel injectors and IAC valve.
Disconnect the vacuum hose trom the fuel pressure regulator and EGR valve, and the luel return hose from the fuel
pressure regulator.
NOTE: Place a rag or shop towel over the hoses before disconnecting them.
4. Disconnect the tuel hose from the fuel rail.
5. Loosen the retainer nuts on the fuel rail and harness holder.
6. Disconnect the PCV valve and fuel rail.
7. Remove the fuel injectors trom the intake manifold.
SEALING
WASHER
Replsc6.
0 0
0 0
CUSHION
RING
Replace.
8. Slide new
9. Coat new
1O. Insert the
'I
1. Coat new
cushion rings onto the fuel injectors.
O-rings with clean engine oil and put them on the fuel injectors.
fuel iniectors into the fuel rail first.
seal rings with clean engine oil and press them into the intake maniforo.
( c o n t ' d )
1 1 - 1 1 9