Selection; Main Journal Code Locations - Honda Prelude 1993 Service Manual

Selection
CAUTION: lf the codes ars indecipherabls b€causo of
an accumulation of dirt and dust, do not scrub them
with a wiro brush or scraper, Clean thgm onlv wiih sol.
vent or .tot€rgont.
Crankshaft Bors Code Location
{Numbers, Lettgrs or Bars}
Numbers or Letters or Bars have been stamped on the
end of the block as a code for the size of each of the 5
main journal bores.
Use them, and the numbers stamped on the crankshaft
(codes for main journal size), to choose the correct bear-
Ings.
IPULI.TY END}
Bcaring Dosign
No. 5 JOURNAL
{FLYWHEEL ENDI
PROJECTION
LOWER
Berring ldentitication
Color code is on the
edge ofthe bearing.
----------------
Largercrankbore
NOTE: When using bearing halves of
different colors, it does not matter
which color is used in the top or bottom.
Smaller Smaller
main
bearing
iournal
(Thicker)
----------> Smaller bearing (Thicker)
Main Journal Code Locations
(Numbers or Bars)
H22Al engine:
Main Joumal Code Locations lNumbers or Ba'sl
H23A1. F22Al engines:
The Main Journal Codes are stamped in one of the fol-
lowing locations.
Main Jou.nal Codo Locations (Numbals or Bar3)
Main Journrl Coda Locationi {Numbers or Br.!}
No. 5 JOURNAL
IFLY WHEEL ENDI
No. 1 JOURNAL
(PULLEY ENDI
No. 1 CRANK WEB