Inspection/Disassembly - Honda Prelude 1993 Service Manual

Inspection/Disassembly
Remove the final driven gear and inspect teeth for
wear or oamage.
NOTE: The final driven gear bolts have left-hand
threads,
Drive out the spring pin with a pin punch.
5.0 mm PIN PUiICH
FINAL DRIVEN GEAR
DIFFERENTIAL CARRIER
3,
Remove the pinion shaft, pinion gears, washers,
thrust washers, and side gears.
Wash the pans thoroughly in solvent and dry them
with compressed air. Inspoct all pans for wear or
damage and replace any that are defective.
PINION GEARS
SIDE GEAR
1 5 - 1 5