Honda Prelude 1993 Service Manual page 155

25.
Loosen the rocker arm adjusting screws, then remove
the camshaft holders and camshafts
Rsmove the side engine rnount bracket B and timing
b€h back cover.
24.
'lO
x 1,25 mm
45 N.m (4.5 kg-m,
33 rb-ft)
8 x 1 . 2 5 m m
22Nm12.2kg-n',
16 tb ft)
ADJUSTING SCREWS
ADJUSTING SCREWS
27, R€move ihe cylinder head bolts, then remove the
cylinder head.
CAUTION: To p.event warpag€, unscr€w the bolts in
soqu€nce 1/3 tutn at a time; rspeat the sequonce until
all bohs aro loossned.
CYLINDER HEAD SOLT LOOSENING
SEOUENCE
NOTE: Separate the cylinder head from the block with a
flat tip screwdriver as shown.
6-87