Valve Body Unit - Honda Prelude 1993 Service Manual

Steering Gearbox
Valve Body Unit
Romoval
1. Drsin the power steering fluid (see page 17-77).
2.
Remove the gearbox shield.
Remove the two I mm flange bolts and remove the
valve body unit from the gearbox.
Remove the O-rings and port orifices trom the
gearbox.
6 .
9.8 x 1.9 mm
O.RING
Replace.
PORT
ORIFICE
45.5 x 2 mm
O.RING
Replace.
Using solvent and a brush. wash any oil and dirt off
the valve body unit, its lines, and that end of the
gearbox. Blow dry them with compressed air.
Using Jlare nut wrenches, disconnect the four lines
Jrom the valve body unit.
A: To oil cooler: 17 mm wrench
8: To power st€qring spsed sensor: 12 mm wrench
C: To reservoir: 12 mm wrench
D: From pump: 14 mm wronch
8 mm FLANGE EOLT
GEARBOX SHIELD
UNIT
1 7 - 1 0 6