Road Test - Honda Prelude 1993 Service Manual

Road Test
NOTE:
Warm up the engins to normsloporating temperature (the radiator tsn comes on).
1. AppV parking brake 8nd block th€ wheels. Start the engine, thon mov€ the selector lever to @]
position while
depressing th€ brak6 pedal. Dopress the accelarator pedal and release it suddenly. Engine should not stall.
2.
Repeet same test in I D3 l poshion
3. ShiJt the selector lev-er tol Dn-lposition and check that the shiJ't points occur at approximats speeds shown. Also check
for abnormalnoise and clut-ch slippage.
NOTE:
Throttle position s€nsor voltagB tepresents th€ throttls opening.
- 1. Connect the Test Harness between the ECM and connector (see section 1 1l'
-2.
Set the digital multimst€r to check voltage betw€en Dl1 (+) terminal and D22 {-) t€rminal for the throttle
posiiion aenaor.
CAUTION:
. Al SRS oloctrlcal wldng harnot3as aro covolad whh yelow
outor Inrulatlon.
. Bololo dsconnecllng tho SRS wlro herna$, Install tho short
connoctor{ll on tho !lrb.g(!}.
. Replac6 tho or|tlle sffocted SRS hlrnoss ass.mblY if h has
an opon chcuh or damrgod wlring.
DIGITAL MULTIMETER
KS_AHM_32
SRS MAI'{ HARI{ESS
14-68