Brake Hose Replacement - Honda Prelude 1993 Service Manual

Brake Hoses/Pipes
Brake Hose Replacement
a
a
cAuTro :
a Bofo.. reassembling, ch€ck that all parts are free ol
dust and othel toraign particles.
Roplace parts with new ones whenev€l spocitiod to
do so.
Uss only cl€an DOT 3 oi DOT 4 braks fluid.
Mako suro no dirt or otho. toroign mattar is allowod
to contaminate th€ blake tluid.
a Do not mix diff€r€nt brands of brako fluid 8s thoy
may not be compatibl€.
a Do not spill brake fluid on the car; it may damage the
paint; it brake tluid doos contact the paint, wash it
oft immediately with wator.
1. Replace the brake hose if the hose is twisted,
cracked or if it leaks.
2. Disconnect the brake hose from the brake oioe us-
ing a 1O mm flare nut wrench.
BRAKE P'PE
Remove and discard the brake hose clip from the
brake hose.
Remove the banjo bolt and disconnect the brake
hose from the caliper.
Remove the brake hose clamp bolts and the brake
hose.
4 .
BNAKE HOSE CLIP
Roplace.
BRAK€ HOSE MOUNTING
SOLT
(8 x 16 mml
22 N.m 12.2 kg-m,
16 tb-frl
BRAKE HOSE
MOUNTING BOLT
1 8 x 2 0 m m ) l
22 N.m 12.2
16 lb-fr)
BANJO BOLT
1 0 x 1 . O m m
35 N.m
13,5 kg-m, 25 lb-tt)
7 .
9 .
MOUNTING BOLT
1 0 N . m ( 1 . 0 k g - m ,
7 tb-ftl
HOSE
6.
Install a new brake hose with the brake hose clamo
bolts.
8 .
Connect the brake hose to the caliper with the ban-
jo bolt and new sealing washers.
Install a new brake hose clip on the brake hose.
Connect the b.ake hose to the brake pipe.
After installing the brake hose, bleed the brake
system (see page 19-121, check the hose and line
joints for leaks. and tighten if necessary.
1 0 .
BRAKE HOSE CLIP
19-28