Electronic Components; Abs Control Unit Replacement; Relay Inspection - Honda Prelude 1993 Service Manual

Electronic Components
ABS Control Unit Replacement
Remove the right quarter trim panel.
Disconnect the ABS control unit connectors.
Remove the ABS control unit attaching bolts, then
remove the ABS control unit.
lnstall the ABS control unit in the reverse order of
r€movar.
1 .
2 .
J .
Relay Inspection
1. Remove the fail-safe relays and motor relay (loca-
t i o n : p a g e 1 9 - 5 0 1 .
2. Check for continuity between the terminals C and
D .
There should be continuity.
3. Check for continuity between the terminals A and
B .
There should be continuity when the battery is con-
nected between the terminals C and D.
There should be no continuity when the baftery is
disconnected,
<Fail-sate Relay:>
<Motor R€lay:>
ABS CONTROL UNIT
1 9 - 8 7