Rear Caliper Disassembly - Honda Prelude 1993 Service Manual

ren
Rear Caliper
Disassembly
a Never use an air hose or dly brush to clean brake
assemblies.
a Use an OsHA-apprgved vacuum clganer to avoid
bleathing brake dust.
CAUTION:
a Do not spill brake fluid on the car; it may damago th€
paint; it brake fluid does contact the paint, wash it
off immediately with water.
a To prevent spills, cover the hose ioints with rags or
shoo towels.
a Clean all parts in brake tluid and air dry; blow out all
passages with complessed air.
1 .
R e m o v e t h e c a l i p e r s h i e l d ( s e e p a g e 1 9 - 1 8 ) .
2 . R e m o v e t h e l o c k p i n a n d c l e v i s p i n .
Remove the cable clip and disconnect the parking
brake cable trom the arm.
3.
Remove the banjo bolt and two sealing washers.
4.
Remove the two caliper mounting bolts and caliper
body from the bracket.
CALIPER MOUNTING EOLT
SEALING
WASHERS
Replace.
LOCK PIN
5 .
6 .
Remove the pad spring from the caliper body.
Remove the piston by rotating the piston
counterclockwise with the special tool and remove
the Diston boot.
CAUTION: Avoid damaging the piston.
PISTON BOOT
LOCKNUT WRENCH
07916-6390001
7. Remove the piston seal.
CAUTION: Take cars not to damage th6 cylinde.
bole.
( c o n t ' d )
Replace.
19-21