Striker Adjustment; Power Door Mirror Replacement - Honda Prelude 1993 Service Manual

Doors
Striker Adjustment
Make su.e the door latches securely without slsmming.
lf it needs adjustment:
1. Draw a line aroud the striker tor reference.
2.
Loosen the mounting screws and move the striker lN
or OUT to make the latch fit tighter or looser. Move
the striker UP or DOWN to align it with the latch
opening, Then lightly tighten the mounting screws and
recheck.
STRIKER
MOUrrnG SCReWS
I x I.25 mm
N.m {1.8 kg-m .
b-ft)
NOTE:
. Hold the outer handle out and push the door against
the body to be sure the striker allows a tlush Jit.
. Do not tap the striker with a metal hammer to
adiust the position.
lf the door lstches properly, tighten the mounting
screws and recheck.
NOTE:
R€place the strikor it it is cracked.
1 8
1 3
Mirrors
Power Door Mirror Replacement
1 . Pry out the cov€r panol with I flat tip scrswdrivor,
then remove the covGr panel.
Disconnect the connector.
Rernove the mounting scrows while holding tho door
mirror.
2.
2
4.
Installation is the revers€ of ths removal procedure.
Check for water leaks.
NOTE:
Do not use high pressur€ wat6r.
DOOR MIRROR
COVER PAI{EL
20-12