Sony FVS-1000 System Maintenance Manual page 97
Multi resolution film scanner, multi resolution telecine, telecine processor, telecine hdtv/sdtv processing boards, telecine log data processor, telecine 16 mm film adaptor kit, telecine optical kit, telecine mounted slide kit, telecine film sound process
Hide thumbs
Also See for FVS-1000 System:
- Operation manual (44 pages) ,
- Maintenance manual (138 pages)
Table of Contents
Advertisement
2-7. Removing/Installing the Cabinet and FTP Panels
Removing/Installing the FTP Panel E
Removal
1. Pull down the move panel assembly.
2. Disconnect the two harnesses connected to the board of the move panel assembly.
3. Disconnect the two harnesses above fixed to the frame and FTP panel E from the clamper.
4. Remove the two screws, and remove the FTP panel E.
At this time, pass the harnesses through the hole in the FTP panel E and remove it.
Hole
B4 x 8
Harness
B4 x 8
Move panel assembly
FTP panel E
Installation
5. Perform the reverse order of steps 1 to 4 of the removal procedure.
2-29
FVS-1000 MMP1
Advertisement
Table of Contents
