Removing/Installing The Cabinet And Ftp Panels; Removing/Installing The Side Panel And Top Panel - Sony FVS-1000 System Maintenance Manual
Multi resolution film scanner, multi resolution telecine, telecine processor, telecine hdtv/sdtv processing boards, telecine log data processor, telecine 16 mm film adaptor kit, telecine optical kit, telecine mounted slide kit, telecine film sound process
Hide thumbs
Also See for FVS-1000 System:
- Operation manual (44 pages) ,
- Maintenance manual (138 pages)
Table of Contents
Advertisement
2-7. Removing/Installing the Cabinet and FTP Panels
2-7. Removing/Installing the Cabinet and FTP Panels
2-7-1. Removing/Installing the Side Panel and Top Panel
Removing/Installing the Side Panel (Top)
Removal
1. Remove the two screws at side and one screw at top of the left side panel (top).
2. Move the left side panel (top) in the arrow direction, and remove from the fixture.
3. Install the right side panel (top) in the same way.
Installation
4. Perform the reverse order of steps 1 and 2 of the removal procedure.
Removing/Installing the Side Panel (Bottom)
n
The side panel (bottom) cannot be removed without removing the side panel (top).
Removal
1. Remove the two screws of the left side panel (bottom).
2. Move the left side panel (bottom) in the arrow direction, and remove from the fixture.
3. Install the right side panel (bottom) in the same way.
Installation
4. Perform the reverse order of steps 1 and 2 of the removal procedure.
Removing/Installing the Top Panel
n
As the top panel is heavy, perform this procedure by two persons.
Removal
1. Remove the 10 fixing screws of the top panel.
2. Move the top panel in the arrow direction, and remove from the unit.
Installation
3. Perform the reverse order of steps 1 and 2 of the removal procedure.
2-18
FVS-1000 MMP1
Advertisement
Table of Contents
