Sony FVS-1000 System Maintenance Manual page 105
Multi resolution film scanner, multi resolution telecine, telecine processor, telecine hdtv/sdtv processing boards, telecine log data processor, telecine 16 mm film adaptor kit, telecine optical kit, telecine mounted slide kit, telecine film sound process
Hide thumbs
Also See for FVS-1000 System:
- Operation manual (44 pages) ,
- Maintenance manual (138 pages)
Table of Contents
Advertisement
Extending the Rear Side Board
1. Remove the 11 screws and remove the rear shield. (for UC/CE model only) (Refer to Section 2-8-1.)
2. Loosen the screws (with stopper) at the top and bottom of the board panel alternately.
3. Holding the screws, pull out the board. (Refer to Section 2-8-1.)
4. Set the dip switches of the extension board according to the board extended.
5. Push in the extension board (EX-670) according to the guide rail.
6. Insert the board removed into the extension board.
Screw (with stopper)
Screw (with stopper)
FVS-1000 MMP1
Extension board
(EX-670)
Processor board
2-9. Using the Extension Board
Dip switches
2-37
Advertisement
Table of Contents
