Sony FVS-1000 System Maintenance Manual page 33
Multi resolution film scanner, multi resolution telecine, telecine processor, telecine hdtv/sdtv processing boards, telecine log data processor, telecine 16 mm film adaptor kit, telecine optical kit, telecine mounted slide kit, telecine film sound process
Hide thumbs
Also See for FVS-1000 System:
- Operation manual (44 pages) ,
- Maintenance manual (138 pages)
Table of Contents
Advertisement
(6) Loosen the lock screw, then insert the control panel.
9. Installation of the OPS assembly
(1) Pull the OPS cover toward you, then remove from the base plate.
(2) Pass the reference pins through the holes on the OPS assembly and OPS support plate, then fix it with
the supplied four screws (M3 x 6) .
(3) Connect the connector of the base plate with CN1 on the SE-515 board.
(4) Adjust the hole at the rear of the OPS cover to the OPS support, push in the OPS support completely,
and install to the base plate.
Reference pins
OPS support
Connector
FVS-1000 MMP1
Control panel
Base plate
Reference pins
OPS support
CN1
OPS support plate
SE-515 board
OPS assembly
OPS cover
OPS support plate
PSW3 x 6
PSW3 x 6
1-10. Installation Procedure
1-21
Advertisement
Table of Contents
