Test Signal Output - Sony FVS-1000 System Maintenance Manual
Multi resolution film scanner, multi resolution telecine, telecine processor, telecine hdtv/sdtv processing boards, telecine log data processor, telecine 16 mm film adaptor kit, telecine optical kit, telecine mounted slide kit, telecine film sound process
Hide thumbs
Also See for FVS-1000 System:
- Operation manual (44 pages) ,
- Maintenance manual (138 pages)
Table of Contents
Advertisement
5-2. Test Mode for the Video System Check
5-2-2. Test Signal Output
SD system test signal
After setting the DIP switch of the DSP-81 board, the test signal will be output from the connector of the
connector panel by turning on the power of this unit.
Use this signal for checking the system connection and the TX-67 board (SD system output board).
Select the type of the test signal to output with the rotary switch S1701 of the DSP-81 board.
DIP switch S1700/DSP-81 board
Bit
Name
1
Mode setting
7
SD test signal ON/OFF
Rotary switch S1701/DSP-81 board
Position
0
1
2
3
4
5
6
7
8
9
A
B
C
D
E
F
5-6
Setting
ON
Local setting
ON
Outputs the test signal
OFF
Outputs no test signal
Test signal
Vertical 100% color bars
V sweep for Progressive (Y/Cb/Cr)
V sweep for Interlace (Y/Cb/Cr)
V ramp (Y/Cb/Cr)
Vertical 75% color bars
V sweep for Progressive (G/B/R : monochrome)
V sweep for Interlace (G/B/R : monochrome)
V ramp (G/B/R : monochrome)
Horizontal 100% color bars
H sweep 8:8:8/12M (Y/Cb/Cr)
H sweep 4:4:4/ 6M (Y/Cb/Cr)
H ramp & 5 steps (Y/Cb/Cr)
Horizontal 75% color bars
H sweep 8:8:8/12M (G/B/R : monochrome)
H sweep 4:4:4/ 6M (G/B/R : monochrome)
H ramp & 5 steps (G/B/R : monochrome)
FVS-1000 MMP1
Advertisement
Table of Contents
